 |
产品详细资料 |
|
 |
SKF heater TIH 100M |
|
|
|
| 型号: |
| SKF加热器 TIH 100M|SKF轴承加热器|SKF加热器现货
The SKF medium induction heater TIH 100m has the same high standards of efficiency and performance as the smaller heater TIH 030m, combined with increased capacity. |
|
订货电话：0312-5920850 5920866 |
|
echnical Specifications:
 |
Induction coil outside the heater’s housing allows shorter heating time and lower energy consumption |
 |
Foldable bearing support arms facilitate the heating of larger diameter bearings |
 |
Magnetic temperature probe helps prevent bearing overheating |
 |
Easy–to–use control panel and LED display integrated in a remote control |
 |
Internal storage for all 3 yokes reduces the risk of yoke damage or loss |
 |
Integrated carrying handle facilitates portability |
 |
Swivel arm |
-
Standard swivel arm for large size yoke
-
Capable of heating a 97 kg (213 lb) bearing in less than 20 minutes, saving time and energy
-
2-step power setting and smaller yokes allow heating smaller bearings safely and at lower power consumption
-
Temperature mode pre–set at 110 °C (230 °F) to help prevent bearing over–heating
Automatic demagnetisation 3 years warranty SKF m20 concept "m20" represents the weight (kg) of the heaviest SRB 231 bearing which can be heated from 20 to 110 °C (68 to 230 °F) in 20 minutes. This defines the heater’s power output instead of its power consumption.
Technical data
-
SKF m20 performance: 97 kg (213 lb)
-
Voltage, V/Hz:
-
230V/50-60Hz or
-
400-460V/50-60Hz
-
Work piece:
-
Maximum weight: 120 kg (264 lb)
-
Maximum bore diameter: 20 - 400 mm (0,8 - 15,7 in)
-
Temperature control:
-
Range: 0 - 250 °C (32 - 482 °F)
-
Magnetic probe: Yes, K-type
-
Accuracy (electronics): ± 2 °C (± 3.6 °F)
-
Time control:
-
Range: 0 - 60 minutes
-
Accuracy: ± 0.01 sec.
-
Maximum temperature (approx.): 400 °C (750 °F)
-
Thermometer mode: Yes
-
Bearing mode: Yes
-
Power reduction: 2-step; 50 - 100%
-
Demagnetisation according to SKF norms (automatic): Yes (<2 A/cm)
-
Can heat sealed bearings: Yes
-
Can heat pre - greased bearings: Yes
-
Error guiding codes: Yes
-
Thermal overload protection: Yes
-
Maximum magnetic flux: 1,7 T
-
Control panel: Key board with LED in remote control
-
Operating area (w × h): 155 × 205 mm (6,1 × 8,0 in)
-
Coil diameter: 110 mm (4,3 in)
-
Dimensions (w × d × h): 570 × 230 × 350 mm (22.4 × 9.0 × 13.7 in)
-
Total weight, including yokes 42 kg (92 lb)
-
Maximum power consumption:
-
3.6 kVA (230V)
-
4.0-4.6 kVA (400-460V)
-
Number of standard: yokes 3
-
Standard yokes:
-
56 × 56 × 296 mm (2,2 × 2,2 × 11,7 in), for heating bearings with bore diameter of 80 mm (3.1 in) and larger
-
28 × 28 × 296 mm (1,1 × 1,1 × 11,7 in), for heating bearings with bore diameter of 40 mm (1.6 in) and larger
-
14 × 14 × 296 mm (0,6 × 0,6 × 11,7 in), for heating bearings with bore diameter of 20 mm (0.8 in) and larger
-
Core cross section: 56 × 56 mm (2,2 × 2,2 in)
-
Yoke storage: Yes, foldable
-
Sliding arm No Swivel arm: Yes, large yoke only
-
Cooling fan: No
-
Housing material: Steel and glass filled polyamide
-
Warranty period - 3 years
|
|
| |
|
Français
Español
Deutsch
Italiano
Nederlands